| Test Current: | DC 100A |
|---|---|
| Measurement Accuracy: | 0.5% |
| Display: | current: three and a half LCD |
| Power Supply: | AC220V 50Hz |
| Transport Package: | Carton/Wooden Case |
| Specification: | With the change of technical scheme |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
ZXBXZ series substation AC withstand voltage resonance device is mainly designed and manufactured for AC withstand voltage test equipment of primary electrical equipment in substations below 500kV. It can meet the requirements of transformers, GIS systems, SF6 switches, CT/PT, insulators, bus bars, cables, bushings, etc. AC withstand voltage test of sexual equipment. According to the requirements of the test procedures for the withstand voltage of primary electrical equipment in substations of 220kV and below, the corresponding AC/DC current withstand test equipment should not only meet the test conditions of high voltage and small current, but also meet the test conditions of low voltage and high current, and it is necessary to take into account the requirements. Wide range of application, using the principle of series resonance, the main equipment is composed of a variable frequency power supply control box (operating table), an excitation transformer, a reactor, and a capacitor voltage divider. On the capacitor voltage divider, the rectifier silicon stack and the Microammeter, the DC withstand voltage test can be completed. Because the system has good filtering characteristics after resonance, the DC voltage produced by it is better than the DC voltage that is first rectified by the ordinary test transformer. It is an ideal pressure-resistant equipment for high-voltage test departments and power installation and repair and test engineering units.
1.Easy to operate, two working modes: manual and automatic.
2.Can set Test Voltage, frequency range, protective current and operating time.
3.Smaller size, lighter weight compared with same voltage level same capacity reactor.
4.Small temperature rise at rated load. Strong protection, good stability. Multiple functions, cost effective.
5.Dry type epoxy cast, high mechanical strength, good insulation, nice and reliable.
6.Adjustable capacity of frequency control source.
7.With 220V or 380V single phase power, convenient for on-site power sourcing.
8.Flexible configuration. Different type reactors for option to meet different test object requirements.
Technical Indicators
1.Rated output voltage: 0 - 1000kV, output frequency: 30 ~ 300Hz.Waveform: pure sine wave, THD <1.0%.
2.Duty Cycle: Continuous working time 60mins one time at full power output.
3.Quality factor: 30-90. Frequency adjustment sensitivity: 0.1Hz, instability <0.05%.
4.Power Supply: 380/220V±15%, 50Hz ± 5%.
Device display
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}