- Model NO.: ZX-A11
- Power: Electricity
- test distance: not less than 40km
- Power supply: DC 6V (7AH)≤6W
- Working environment: -10 oC~ + 40 oC, Relative humidity: 80%RH
- Transport Package: Carton
- HS Code: 9030899090
- Connectors: USB
- Customized: Customized
- Minimum measuring distance (dead zone): 10-15 meters
- signal frequency: 15kHz sine wave
- Trademark: GDZX
- Origin: China
1.Equip with USB communication interface, fault testing software, data management software
2.The main machine auto select sampling frequency, total five kinds of frequency available (min: 6.25MHz, max 100MHz) to meet measuring request for cable with different length.
3.Auto search the fault, auto display the distance, double cursor resolution 0.15m
4.Testing waveform can be compressed or extended, two close waveform available for comparing.
5.Intelligent sampler without complicated wire connection, waveform can be easily seen and analyzed, totally isolated with high voltage so very safe
1. Can test cable fault of different cable sections, different dielectric and different cable materials. Can test open-circuit cable fault, short-circuit cable fault, low-resistance cable fault, high-resistance leakage cable fault and high-resistance flashover cable fault.
2. Can test wave propagation velocity in any cable of known length.
3. Can test buried route and depth of power cable.
Test distance: not less than 40km
Minimum measuring distance (dead zone): 10-15 meters
pinpoint error: ± 0.2m
test error: System error is less than ± 1%
Resolution: ≤V/50m, V is waveform velocity m/μs
Instrument Sampling frequency: 6.25MHz, 12.5MHz, 25MHz, 50MHz, 100MHz, (adaptive pulse width)
Power supply and power consumption: DC 6V (7AH)≤6W
Signal frequency: 15KHz sine wave
Output power: Pomax≥100W
Output impedance: Zo = Zc (Cable characteristic resistivity)
Shock mode: intermittent
Working temperature: -10 oC~ + 40 oC, Relative humidity: 80%RH
Detector(locator) dimension: 120mm×120mm×295mm, Weight: 3.8KG